“In/Out” UPflow tank-style water filters works great. Tank-style non-backwashing filters are inexpensive, easy to set up, and easy to maintain.
They use no electricity and need no drain connection. Since there's nothing to wear out, they're virtually trouble free. They use exactly the same granular filter media — regular granular activated carbon that are used in our more expensive whole house backwashing filters.
The main requirement for use of these whole house non-backwashing tank-style filters is clean water. If the objective is to remove chlorine from clean city water, a non-backwashing In/Out filter does an exceptional job. Unless the inlet water is very clean and free of rust and other sediment, we recommend that a cartridge-style sediment filter be installed in front of the filter tank.
The In/Out whole house carbon filters are efficient devices. They cost considerably less than their backwashing counterparts and require less maintenance. They save water — no backwashing — and they do not require electricity.
With In/Out units, water simply enters the tank, passes through the media bed, and flows out. There is no cleaning process. Non-backwashing tank filters are arranged so that the water being treated flows upward through the tank, entering at the bottom and exiting at the top. This reversed flow lifts the bed, keeps it fresh, and minimizes channeling. A special straining basket at the top of the tank prevents media loss.
Water Softener is an Ion Exchanger
Hard Water with a high calcium/magnesium content enters the softener through the "in" port indicated by the green arrow. It passes through the control valve and in to the tank where it goes from top to bottom through a specially prepared resin that "softens" it, the resin consists of specially manufactured beads that have been saturated with sodium ions. Softening occurs as the hardness minerals in the water attach themselves to the resin and are "exchanged" for sodium. The softened water then enters the long center tube called a riser, via the strainer basket at the bottom of the tank and passes upward through the riser. Then water exits the softener via the control valve (Blue Arrow) and is sent to the desired location.
When the resin becomes saturated by hardness minerals, the softener automatically goes into regeneration. The regeneration process is initiated by a time or a meter depending on the type of softener. By this process the hardness minerals are washed down the drain and resin bed is rinsed, re-settled and re-charged with sodium, it is now ready again to soften your water. The re-generation process is accomplished by passing very salty water from the brine tank through the resin. The brine tank must remain filled with softener salt at all times so that it can re-generate the softening resin.
Fleck 5600SXT digital metered softener
Features & Benefits:
- Simple to install - Simple to set – simple to operate
- Just one (1) internal moving part in the water stream
- Engineered with double backwash
- Utilizes compact turbine-electronic meter
- Solid-state computer control offers four modes of operation: (1) immediate meter regeneration, (2) delayed meter regeneration, (3) delayed time clock regeneration or (4) day of week regeneration.
- Built-in capacitor keeps memory up to 48 hours and programming will not be lost if power is lost
- Adjustable cycle times are available in programming section
- Display shows time of day and gallons of soft water remaining
- 5-year valve warranty/10-year tank warranty
- Premium high-efficiency softening resin
- 14” x 33” brine tank with salt grid and safety float system
- Bypass Valve 1"
Includes: FRP Tank, Brine Tank, Fleck 5600SXT Valve, Bypass Valve, Softener Ion Exchange Media.
Reverse Osmosis 4 Stage 50 GPD
1st Stage - Sediment Filter 5 Mic
2nd Stage - Carbon Block 5 Mic
3rd Stage - TFC-1812-50 Membrane
4th Stage - Post Carbon Filter 1/4" FNPT
What is included in RO assembly:
2 - White Filter Housings 10" Standard
1 - Mounting Bracket
1 - Membrane Housing - Check Valve & Fittings
1 - Auto Shut Off valve
1 - Drain Saddle Valve
1 - Flow Restrictor
1 - Feed Water Adapter - 1/2" FIP x 1/2" MIP x 1/4" OD Tube push in
1 - ROT-120 - 2 G Tank with tank valve
1 - Standard Non - Air gap Faucet
1 - Filter Housing Wrench
Complete Unit - ready DIY Install
Our Address: 311 East Ave K8 Stu. 111
Lancaster, CA US 93535