A Point-of-Entry water treatment system is installed on your side of the meter with the express purpose of treating all of the incoming water before it goes into the individual supply lines that feed your laundry, bathrooms (including toilets), dedicated outside faucets and others as well as your kitchen. POE systems often include softeners, large bed carbon filters, and some systems which are specifically designed to remove (or trap) sediment, foul tastes and odors. POE systems are sometimes considered pre-filters. A Point-of-Use water treatment system is installed in an individual source line ahead of any or all of the building's taps, faucets or other dedicated outlets used to dispense water for drinking, cooking or bathing. Good POU systems are often expected to capture whatever escapes the POE system.
Sediment water filters are designed to remove rust particles, sand, silt, scale particles, fine, coarse, extra-fine, loose scale, clay or organic material from water or other suspended materials. Pathogenic bacteria can hide within these materials or make the pathogens hard to remove. Sediment water filters can be used as pre-filters in combination KDF85/GAC Filter.
- 20" X 4.5" BIG BLUE FILTER WITH KDF55/GAC FILTER CARTRIDGE
- 1 20"x 4.5" KDF55/GAC CARTRIDGE
- 1 20"x 4.5 SEDIMENT FILTER
- DUAL HOUSING MOUNTING BRACKET
- Big Blue Filter Housing Wrench
- Assembly Required
- 8 Mounting Hex Bolts
- 1 Connector 1"x2" Threaded
The life of filter depends on the contamination levels and amount of water consumed daily. The normal filter life for typical non commercial application is about 20,0000 gallons. For good results and longer filter life sediment filter is included.
Our Address: 311 East Ave K8 Stu. 111
Lancaster, CA US 93535