560
Our Address: 311 East Ave K8 Stu. 111
Lancaster, CA US 93535
Filter-AG Plus is a unique natural ore called clinoptilolite that has many outstanding advantages over
common granular filter sands and multimedia used for suspended solids reduction. Viewed under a
electron microscope, the granules reveal a angular shape, rough surface and microporous void spaces
as small as 3 microns. This creates a surface are over 100 times greater then silica sand. The angularity
of the granules and the tapered internal pore spaces allow for reduction of dirt, silt and organic matter
suspended in water by bridging, straining and adhesion. The rough surface and internal porosity provide
a high surface area for efficient reduction of suspended matter. Utilizing deep bed filtration can typically
reduce suspended solids down to 5 microns or less rang. Filter-Ag Plus structure typically creates less
pressure loss through the filter and allow deeper sediment penetration into the bed for higher sediment
loading and long filter runs. The deep bed filtration capacity of Filter-Ag Plus prevents a rapid buildup of
head loss and binding problems that are associated with typical sand filters. The longer filter run times
reduce backwash frequency, which provides conservation of water.
1 - 948 FRP Tank
1 - TWP Flotrol Timer BackWash Valve 110V
1 - Upper Basket
1 - CU FT AG Filter- Ag Plus
BENEFITS
- Higher solids loading capability
- Superior filtration performance
- Reduced backwash frequency
- Removes finer particles
- Reduces pressure drop
- Provides higher flow rates
- Packaged in a 1.0 cu/ft box
- Discounts available for full skid quantities
PHYSICAL PROPERTIES
- Color: Light tan to near white
- Dry Bulk Density: 50 lbs/cu.ft
- Specific Gravity: 2.2 g/cc
- Mesh Size: 14x30
- Effective Size: 0.55mm
- Uniformity Coefficient: 1.8
- Hardness: 4-5 (Mohs Scale)
CONDITIONS FOR OPERATION
- Water pH: Wide range
- Max. Water Temp.: 140°F/60°C
- Bed Depth: 24-36 inches
- Freeboard: 50% of bed depth
- Backwash Flow Rate: 15-20 gpm/ sq.ft.
- Backwash Bed Expansion: 30-40% of bed depth
- Service Flow Rate: 12-20 gpm/sq.ft.
- Local conditions may require lower flow rates
- A gravel support bed is required
- Allow bed to saturate before initial backwash
Please email us at: 123WaterFilter@gmail.com
Our Address: 311 East Ave K8 Stu. 111
Lancaster, CA US 93535
Contact Us : 661-388-2188
We ship worldwide, please contact for shipping quote.