Titan Water Pro
Standard Reverse Osmosis for every 1 Gallon clean water will send to waste drain 3-4 Gallon water. The new Pentair GRO-50EN Membrane have a 1 to 1 ratio on purified water to rejected water.Titan Reverse Osmosis Water Filtration System 6 Stage RO - Alkaline Ionizer Neg ORP.
Reverse Osmosis product water is more acidic due to it's purity. By the time the water is processed through the various stages, after the reverse osmosis stage, minerals etc has been removed. To replenish necessary minerals, an alkaline filter is recommended. The alkaline filter, the 5th stage in this system is recommended, as reverse osmosis product water tends to be acidic due to the purity of the water. All minerals have been stripped from the water. To buffer the water to a more natural alkaline state, and to add essential minerals back ie. calcium, magnesium, potassium and sodium. We highly recommend the alkaline filter. This filter will increase the alkalinity without over correcting.This alkaline antioxidant filter provides abundant Active Hydrogen and also increases reduction power by increasing pH, making small water cluster and providing beneficial minerals. Negative ORP, which is produced with ionized alkaline water, severely retards the aging process. By counteracting oxidative damage to our cells. It does this by hunting down free radicals in our system and neutralizing them. Negative ORP is a very powerful anti-oxidant. and is found naturally in orange juice, glacial runoff and deep underground uncontaminated aquifer or spring water. The 6th stage is an inline carbon filter that polishes the water for a sparkling taste. Reverse osmosis, also known as hyper-filtration, is the finest filtration available today. It is the most common treatment technology used by premium bottled water companies. It is effective in eliminating or substantially reducing a very wide array of contaminants, and of all technologies used to treat drinking water in residential applications, it has the greatest range of contaminant removal. Reverse osmosis will allow the removal of particles as small as individual ions.
Reverse osmosis uses a membrane that is semi-permeable, allowing pure water to pass through it, while rejecting the contaminants that are too large to pass through the tiny pores in the membrane. Quality reverse osmosis systems use a process known as cross-flow to allow the membrane to continually clean itself. As some of the fluid passes through the membrane the rest continues downstream, sweeping the rejected contaminants away from the membrane and down the drain. The process of reverse osmosis requires a driving force to push the fluid through the membrane (the pressure provided by a standard residential water system is sufficient - 40 psi+).
Since membranes are subject to degrading by chlorine, iron, manganese, and hydrogen sulfide, and to bacterial attack, a sediment pre-filter and an activated carbon pre-filter and/or post-filter is included with your reverse osmosis system. RO systems are generally the best choice for water contaminated with high nitrite levels as might be found in agricultural areas.
- Stage 1 Sediment Water Filter
- Stage 2 Granular Activated Carbon (GAC)
- Stage 3 Carbon Block CTO Water Filter
- Stage 4 High Recovery Membrane Pentair - GRO-EN50
- Stage 5 Alkaline Ionizer Inline Water Filter
- Stage 6 Post Caron GAC Inline Water Filter
Color Coded Tubings 1/4" OD for easy installation.Installation Guide/Manual will be send via email.Pentair TLC Residential Membranes use an industry leading state of the art TLC (Thin Layer Composite) membrane providing high quality water for a broad range of water chemistries.The Pentair GRO-50EN are Tested and Certified by NSF International against NSF/ANSI Standard 58 for materials and structural integrity requirements.Features/Benefits:
- 1. RO Tank 3.2 (2.8G) 1/4" MPT
- 1. RO Tank Valve 1/4"MPT x 1/4" Tube
- 1. RO Faucet (Non Air Gap) Chrome Finish
- 1. RO Housing Wrench
- 1. Drain Saddle Valve - 1/4" Push in type Quick Connect
- 1. Feed Water Adapter - 1/2" MIP x 1/2" FIP x 1/4" Tube QC
- 1. Housing Wrench
- 1. Manual Membrane Flush kit (Extends membrane life with frequent flush)
Double the recovery over standard reverse osmosis elements
Rejection performance comparable to standard reverse osmosis elements.
High rejection stability at high input TDS
TLC Thin Layer Composite membrane
125 PSI (6.90 bar)
Free Chlorine: 0.1 ppm
Pentair GRO-50EN - Tested at 65 psi, 77 F Temp, 50% Recovery, 500 ppm NaCL/RO
Excellent Reverse Osmosis Water Filtration System. Saves Water. 1:1 Clean Product Water to Rejected Water.