Reverse Osmosis Water Filtration System - Permeate Pump - Delivery Pump 100 GPD

Reverse Osmosis Water Filter System 5 Stage unit includes all the essential features necessary to start making pure RO water. This system includes everything needed to install and start making clean water.

Although the 3 pre-filters normally last 12 months on most city water sources, they may need to be replaced sooner if your water source has heavy sediments and other contaminants.

What's included:

• 1 Sediment Water Filter (5 MICRON)
• 1 Carbon Block Water Filter (5 MICRON)
• 1 GAC Coconut Shell Activate Carbon
• 1 RO Membrane 100 GPD
• 1 Inline Post Carbon Filter
• 1 RO Tank 20 Gallon
• 1 Feed Water Adapter 1/2"MPT x 1/2" FPT x 1/4" QC TUBING
• 1 Drain Saddle Valve 1/4" Tubing Quick Connect
• 1 Check Valve on Membrane Housing
• 1 Flow Restrictor
• 1 Housing Wrench
• 1 Inline Ball valve
• 1 Permeate Pump ERP 1000
• 1 Shurflo Delivery Pump 3.3 GPD Model 2088-594-154

COLOR CODED TUBING FOR EASY INSTALLATION (approx. 4 feet each per connection)

THIS SYSTEM COMES WITH EVERYTHING FOR EASY INSTALLATION AND READY TO GO.

1^ST STAGE: SEDIMENT FILTER 5 MICRON

Sediment Filter is a 4 stage polypropylene sediment filter with a high dirt holding capacity

Size: 2.75" x 9,.75" fits 10" standard housing.

2^ND STAGE: CARBON BLOCK 5 MICRON

Size: 2.75" x 9,.75" fits 10" standard housing.

• Chlorine, Taste & Odor Reduction
• Made with Premium Quality Coconut Shell Activated Carbon
• 5 µ Filtration
• No Release of Carbon Fines
• Fits all Standard 10" Filter Housings
• 2500 Gallon capacity @ 1 PPM Chlorine with 98% chlorine removal at end of cartridge life.
• Flow rate: 1 GPM
• Cartridge is designed for use in Under Sink Filtration & Reverse Osmosis Applications

3^RD STAGE GAC GRANULAR ACTIVATED CARBON FILTER

• Size: 2.75" x 9,.75" fits 10" standard housing.
• GAC Activated Carbon GAC Filter Cartridge (UDF-10) is granular activated carbon (GAC) coconut shell water filter replacement cartridge used to reduce the bad taste and odor of chlorine in a variety of low-flow applications such as under sink, countertop, and pre/post-reverse osmosis water filtration systems. This filter may also be used in some humidifying systems, recreational vehicle filtration systems, and food service applications.

4^TH STAGE: MEMBRANE 100 GPD

5^TH STAGE: INLINE CARBON FILTER 2.5"X 12"- for taste and odor regulation

This unit includes Permeate Pump Model ERP 1000 a simple, yet revolutionary device. Powered only by the hydraulic energy of brine water usually lost to the drain (i.e. no electricity required), the Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure. These pumps dramatically improve the efficiency of RO water production, reducing waste water by up to 80%. Permeate Pumps can also bring storage tanks up to line pressure and then shut the system down when these tanks reach capacity, eliminating the need for a hydraulic shut off valve. Other benefits include higher delivery pressures, faster RO water production, superior water quality and extended filter/membrane life.

From Brine Waste:

• Improves recovery rates by as much as 400%
• Reduces waste water by as much as 80%
• Enhances contaminant rejection
• Ideal for membrane rated from 10-100 GPD
• Effective for inlet water pressure as low as 30 psi
• Increases membrane life, lowers "TDS creep"
• Fills product tank up to 4 times more rapidly
• "This is one of the best Reverse Osmosis Water Filter System available"

1 Shurflo - Model 2088-594-154 - Voltage 115VAC 60HZ - Max Flow 3.3 GPM (12.6 LPM) Motor: 11-15-10 - Transfer/delivery pump (Non Corded)

The 2088 Series are high flow, low pressures ideally suited for beverage applications such as city water pressure boost, portable cart water delivery, batch transfer of product, etc.
Features: Automatic demand, 0 –50 psi (0 – 3.4 bar) Self Priming up to 12 vertical feet (3.7m) Can run dry without damage Built-in check valve (may vary by model) prevents back flow of fluid Chemical resistant materials NSF listed. UL/CSA recognized components

Model	Description
2088-594-154	Transfer PUMP (non-corded) 115VAC, 45 psi demand switch/3.3 GPM open flow 1/2 -14 " MPT-Male ports Product Data Sheet Operations Manual