RO - Reverse Osmosis Alkaline/Ionizer Neg ORP Water Filter System 75 GPD 6 Stage

Regular price $145.00 Sale price $195.00

Quantity

Titan Water Pro 6 STAGE REVERSE OSMOSIS 75 GPD ALKALINE/IONIZER NEGATIVE ORP WATER SYSTEM - COMPLETE.

This filter will increase the alkalinity without over correcting.This alkaline antioxidant filter provides abundant Active Hydrogen and also increases reduction power by increasing pH, making small water cluster and providing beneficial minerals.The 6th stage is an inline carbon filter that polishes the water for a sparkling taste.

Reverse osmosis uses a membrane that is semi-permeable, allowing pure water to pass through it, while rejecting the contaminants that are too large to pass through the tiny pores in the membrane. Quality reverse osmosis systems use a process known as crossflow to allow the membrane to continually clean itself. As some of the fluid passes through the membrane the rest continues downstream, sweeping the rejected contaminants away from the membrane and down the drain. The process of reverse osmosis requires a driving force to push the fluid through the membrane (the pressure provided by a standard residential water system is sufficient - 40 psi+).

Since membranes are subject to degrading by chlorine, iron, manganese, and hydrogen sulfide, and to bacterial attack, a sediment pre-filter and an activated carbon pre-filter and/or post-filter is included with your reverse osmosis system. RO systems are generally the best choice for water contaminated with high nitrite levels as might be found in agricultural areas.

This unit contains the following.

1 Sediment Filter Filter
1 Granular Activated Carbon Filter
1 Carbon Block Filter
1 Membrane 75 GPD
1 Inline Alkaline/Ionizer Negative Orp Filter
3 Filter Housings (10" Standard Size)
1 Mounting Bracket
1 ASV Valve
1 Type Flow Restrictor
1 RO Water Storage Tank 3.2G with capacity of 2.8G (9"x15")
1 RO Faucet
1 Feed Water EZ adapter (1/2" MIP x 1/2" FIP to 1/4" Tubing QC PVC)
1 Drain Saddle Valve
1 Housing Wrench

1st Stage - All of our sediment filters use multi-gradient spun polypropylene filter cartridges. These cartridges use the entire depth of their media by trapping the largest sediment particles on the outside of the filter, then gradually stepping down the size of particles they will reject as the water moves closer to the core of the filter. The result is longer filter life, greater dirt-holding capacity, higher flow rates, and remarkably low pressure drop. The 100% pure polypropylene media is highly resistant to bacteria and chemicals, making this an excellent choice for both well water and municipal water treatment applications.

2nd Stage - Carbon is a substance that has a long history of being used to absorb impurities and is perhaps the most powerful absorbent known to man. One pound of carbon contains a surface area of roughly 125 acres and can absorb literally thousands of different chemicals. Activated carbon which has a slight electro-positive charge added to it, making it even more attractive to chemicals and impurities. As the water passes over the positively charged carbon surface, the negative ions of the of the contaminants are drawn to the surface of the carbon granules.

3rd Stage - With carbon block filters, water is forced through the pores of the densely compacted carbon block, where a combination of mechanical filtration, electrokinetic adsorption, and physical/ chemical adsorption take place to reduce a wide range of contaminants. Solid Carbon Block technology can reduce chlorine, taste and odor problems, particulate matter, and a wide range of contaminants of health concern -- cysts (cryptosporidium and giardia), VOCs (pesticides, herbicides, and chemicals), certain endocrine disrupters, Trihalomethanes (cancer-causing disinfection by-products), heavy metals (lead, mercury), turbidity, MTBE, Chloramines and asbestos. Solid carbon block filters do not remove healthful, naturally-occurring minerals.

TYPICAL REJECTION CHARACTERISTICS OF R.O. MEMBRANES
Elements and the Percent R.O. Membranes will remove

Calcium	99
Sodium	98
Magnesium	98
Potassium	96
Manganese	98
Iron	98
Aluminum	98
Copper	99
Nickel	99
Cadmium	97
Silver	96
Zinc	98
Mercury	97
Hardness Ca&Mg	97
Radioactivity	97
Chloride	98
Ammonium	90

Bromide	95
Phosphate	98
Cyanide	97
Sulfate	99
Thiosulfate	98
Silicate	95
Silica	98
Nitrate	95
Boron	70
Borate	50
Fluoride	95
Polyphosphate	98
Orthophosphate	98
Chromate	95
Bacteria	99+
Lead	98
Arsenic	90

Alkaline/Ionizer Negative ORP Filter - The alkaline filter, the 5th stage in this system is recommended, as reverse osmosis product water tends to be acidic due to the purity of the water. All minerals have been stripped from the water.

Post Carbon Filter - A final Polishing step that ensues a sparkling clean and pure water taste.

THE SYSTEM COMES COMPLETE WITH ALL PARTS FOR A STANDARD DIY INSTALLATION

Shipping Policy

Open tab

Shipping Policy

Shipping Time -- Most orders received before 5:00PM will ship the same day, provided the product ordered is in stock. Most orders received after 5:00 PM will ship the next business day. Orders are not processed or shipped on Saturday or Sunday, except by prior arrangement.

We cannot guarantee when an order will arrive. Consider any shipping or transit time offered to you by Sample Store or other parties only as an estimate. We encourage you to order in a timely fashion to avoid delays caused by shipping or product availability.