Reverse Osmosis product water is more acidic due to it's purity. By the time the water is processed through the various stages, after the reverse osmosis stage, minerals etc has been removed. To replenish necessary minerals, an alkaline filter is recommended. The alkaline filter, the 5th stage in this system is recommended, as duction power by increasing pH, making small water cluster and providing beneficial minerals. Negative ORP, which is produced with ionized alkaline water, severely retards the aging process. By counteracting oxidative damage to our cells. It does this by hunting down free radicals in our system and neutralizing them. Negative ORP is a very powerful anti-oxidant. and is found naturally in orange juice, glacial runoff and deep underground uncontaminated aquifer or spring water. The 6th stage is an inline carbon filter that polishes the water for a sparkling taste.
Reverse osmosis, also known as hyperfiltration, is the finest filtration available today. It is the most common treatment technology used by premium bottled water companies. It is effective in eliminating or substantially reducing a very wide array of contaminants, and of all technologies used to treat drinking water in residential applications, it has the greatest range of contaminant removal. Reverse osmosis will allow the removal of particles as small as individual ions.
Reverse osmosis uses a membrane that is semi-permeable, allowing pure water to pass through it, while rejecting the contaminants that are too large to pass through the tiny pores in the membrane. Quality reverse osmosis systems use a process known as cross-flow to allow the membrane to continually clean itself. As some of the fluid passes through the membrane the rest continues downstream, sweeping the rejected contaminants away from the membrane and down the drain. The process of reverse osmosis requires a driving force to push the fluid through the membrane (the pressure provided by a standard residential water system is sufficient - 40 psi+).
Since membranes are subject to degrading by chlorine, iron, manganese, and hydrogen sulfide, and to bacterial attack, a sediment pre-filter and an activated carbon pre-filter and/or post-filter is included with your reverse osmosis system. RO systems are generally the best choice for water contaminated with high nitrite levels as might be found in agricultural areas.
This unit contains the following:
- 1 Sediment Filter Filter 5 Mic
- 1 Granular Activated Carbon Filter
- 1 Carbon Block Filter 5 Mic
- 1 Membrane TFC-2012-100
- 1 Inline Alkaline/Ionizer Negative Orp Filter
- 1 Post Carbon GAC Inline Filter
- 3 Filter Housings (10" Standard Size)
- 1 Mounting Bracket
- 1 Flow Restrictor
- 1 RO Water Storage Tank 3.2G with capacity of 2.8G (9"x15")
- 1 RO Faucet Standard Non Air Gap
- 1 Feed Water EZ adapter (1/2" MIP/FIP to 1/4" Tubing QC PVC)
- 1 Drain Saddle Valve
- 1 Housing Wrench
- 1 Permeate Pump ERP 1000
1st Stage - All of our sediment filters use multi-gradient spun polypropylene filter cartridges. These cartridges use the entire depth of their media by trapping the largest sediment particles on the outside of the filter, then gradually stepping down the size of particles they will reject as the water moves closer to the core of the filter. The result is longer filter life, greater dirt-holding capacity, higher flow rates, and remarkably low pressure drop. The 100% pure polypropylene media is highly resistant to bacteria and chemicals, making this an excellent choice for both well water and municipal water treatment applications.
2nd Stage - Carbon is a substance that has a long history of being used to absorb impurities and is perhaps the most powerful absorbent known to man. One pound of carbon contains a surface area of roughly 125 acres and can absorb literally thousands of different chemicals. Activated carbon which has a slight electro-positive charge added to it, making it even more attractive to chemicals and impurities. As the water passes over the positively charged carbon surface, the negative ions of the of the contaminants are drawn to the surface of the carbon granules.
3rd Stage - With carbon block filters, water is forced through the pores of the densely compacted carbon block, where a combination of mechanical filtration, electrokinetic adsorption, and physical/ chemical adsorption take place to reduce a wide range of contaminants. Solid Carbon Block technology can reduce chlorine, taste and odor problems, particulate matter, and a wide range of contaminants of health concern -- cysts (cryptosporidium and giardia), VOCs (pesticides, herbicides, and chemicals), certain endocrine disrupters, Trihalomethanes (cancer-causing disinfection by-products), heavy metals (lead, mercury), turbidity, MTBE, Chloramines and asbestos. Solid carbon block filters do not remove healthful, naturally-occurring minerals.
Alkaline/Ionizer Negative ORP Filter - The alkaline filter, the 5th stage in this system is recommended, as reverse osmosis product water tends to be acidic due to the purity of the water. All minerals have been stripped from the water. To buffer the water to a more natural alkaline state, and to add essential minerals back ie. calcium, magnesium, potassium and sodium. We highly recommend the alkaline filter. This filter will increase the alkalinity without over correcting.This alkaline antioxidant filter provides abundant Active Hydrogen and also increases reduction power by increasing pH, making small water cluster and providing beneficial minerals. Negative ORP, which is produced with ionized alkaline water, severely retards the aging process. By counteracting oxidative damage to our cells. It does this by hunting down free radicals in our system and neutralizing them. Negative ORP is a very powerful anti-oxidant. and is found naturally in orange juice, glacial runoff and deep underground uncontaminated aquifer or spring water.
Post Carbon Filter - A final Polishing step that ensues a sparkling clean and pure water taste.
THE SYSTEM COMES COMPLETE WITH ALL PARTS FOR A STANDARD DIY INSTALLATION
ERP 1000 SERIES
Water Treatment RO
Benefits & Features:
Effective for inlet water pressure as low as 30 psi
- Requires no electricity, powered by energy from brine water
- Increases membrane life, lowers "TDS creep"
- Improves recovery rates by as much as 400%
- Fills product tank up to 4 times more rapidly
- Reduces waste water by as much as 80%
- Enhances contaminant rejection
- Ideal for membranes rated 10-100 GPD
- NSF approved (Standard 58)
- One Year manufacturer's warranty*
How does the permeate pump work ?
The ERP 1000 Permeate pump is using the energy of the brine Water of your RO- system, to pump the permeate into your pressure Tank. It does not require electricity for that. It is just using hydraulic energy that normally goes to drain unused.
This way, it isolates your Tank from the membrane and lets your membrane perform like in an atmospheric tank system. Look at our Computer animation below. You can click on the image to enlarge it. If you click on the pump you get a detailed view on the pump only.
Our Address: 311 East Ave K8 Stu. 111
Lancaster, CA US 93535